PRODUCT
Simulate pulse interference caused by switch switching, relay bounce, and other factors. Conducted along the power and signal lines to the device, cau
Simulate pulse interference caused by switch switching, relay bounce, and other factors. Conducted along the power and signal lines to the device, cau
EFT Burst Generator (Electrical Fast Transient / Burst Immunity Test System) is designed to simulate electrical fast transient disturbances generated by switching inductive loads, relay operations, and other transient interference sources in power supply networks. It is widely used for EMC immunity testing of electrical and electronic equipment.
The system supports AC 0–220 V / 16 A and DC 0–110 V / 16 A EUT testing, with an adjustable pulse voltage range of 0.2 kV to 5 kV. The built-in CDN supports single-phase three-wire AC and DC testing, providing a complete solution for EFT/Burst immunity verification.
·Sample capacity: AC 0‑220 V/16 A, DC 0‑110 V/16 A
·EFT‑burst output interference voltage range: 0.2 kV‑5 kV
·Equipped with 10.1‑inch intelligent capacitive touch screen for simple operation
·Built‑in single‑phase three‑wire automatic coupling‑decoupling network
·Adopts semiconductor switch for smooth waveform
·Supports custom parameter configuration and saving
·Stable and reliable equipment performance
·Automatic storage of test reports
·Built‑in IEC standard library
| Parameter | Specification |
| Simulation Item | Electrical Fast Transient / Burst (EFT) Immunity |
| EUT Power Capacity | AC: 0–220 V / 16 A; DC: 0–110 V / 16 A |
| Pulse Voltage | 0.2 kV–5 kV |
| Pulse Voltage Resolution | 1 V |
| Output Voltage Polarity | Positive, Negative, Positive-then-Negative, Negative-then-Positive |
| Internal Resistance | 50 Ω |
| Frequency Range | 0.1 kHz–1000 kHz |
| Frequency Resolution | 0.1 kHz |
| Standard Frequency | 5 kHz, 100 kHz |
| Pulse Front Time | 5 ns |
| Pulse Width (50 Ω) | 50 ns |
| Pulse Width (1 kΩ) | 35 ns–150 ns |
| Number of Pulses per Burst | 1–500 |
| Burst Cycle Time | 15 ms–9999 ms |
| IEC Standards | Built-in IEC standards, supporting testing according to standard requirements |
| Communication Interface | RS485, LAN |
| CDN | Single-phase three-wire (built-in) / DC compatible |
| Operating System | Android |
| Display | 10.1" Intelligent Capacitive Touch Screen |
| External Interfaces | HDMI, USB, BNC, etc. |
| Operating Environment | Temperature: 10℃–40℃; Humidity: 30%–70% |
| Power Supply | AC 110 V / 220 V @ 50 Hz / 60 Hz |
| Dimensions | 4U / 19" Standard Cabinet |
| Weight | 10 kg |
Friendship link： EMC testing equipment | privacy-policy.html |
